PE polyethylene feed pipe

PE polyethylene feed pipe is widely used in the field of water supply pipe manufacturing, its high strength, corrosion resistance, non-toxic and other characteristics. not rust, instead of steel pipe, suitable for water pipe, pressure water supply pipe, irrigation pipe, etc.

PE polyethylene feed pipe Product characteristics

Non toxic hygiene: polyethylene pipes are strictly hygienic tested. The standard of pipes is CB/T13663-2000. The hygienic properties of drinking water pipes meet the requirements of GB/T17219. Non-toxic, hygienic and never scaling can effectively improve the water quality of the pipe network and serve as green building materials.

Corrosion resistance: polyethylene is inert material with excellent corrosion resistance, resistance to various chemicals, rust free and electrochemical corrosion.

Low temperature resistance: polyethylene has low temperature embrittlement temperature and can be used safely in the range of-60-60℃.

High toughness: the elongation of PE pipe is more than 500%, and the bending radius is 20-25 times the diameter of the pipe.The polyethylene pipe can be rolled and rolled, avoiding a large number of joints and fittings.It has strong adaptability to uneven settlement of foundation, and is resistant to environmental stress cracking, scratch resistance and seismic resistance.

Low energy consumption: low friction coefficient of pipe wall, small flow resistance and strong conveying capacity.

Long service life: PE service life of pipes is more than 50 years, aging resistance.After recycling, water and carbon dioxide can be generated.

PE polyethylene feed pipe Scope of application

Urban water supply network system, industrial raw material delivery pipeline, garden greening water supply network, sewage discharge, ore, slurry transportation, agricultural irrigation and so on.

PE polyethylene feed pipe Pipe connection

PE water supply pipe connection has hot melt connection and electric melting connection.Hot melt connection is divided into hot melt socket connection and hot melt butt joint. Electric melting connection is divided into electric melting socket connection and fused saddle type connection.

1. material preparation: place the pipes or fittings in a flat position and put them on the docking machine, leaving 10-20mm cutting allowance.

2. clamping: according to the welded pipe and pipe fittings, choose the appropriate clamping fixture and clamping tube to prepare for cutting.

3. cutting: cutting the welding pipe section, pipe end face impurities and oxidation layer, ensure that the two butt end face is smooth, clean and free from impurities.

4. pairs of middle: two welded pipe ends should be completely aligned, the smaller the smaller the better, the wrong side should not exceed the 10%.of the wall thickness, otherwise, the quality of the butt joint will be affected.

5. heating: the butting temperature is generally between 210-230℃.The heating time of heating plate is different from that of winter and summer, and the melting length of two face is 1-2mm.

6. switch: remove the heating plate and quickly make the two hot melt surface stick and pressurize.In order to ensure the quality of melting butt, the shorter the switching period is, the better.

7. melting butt joint is the key to welding.Butt welding should always be carried out under the melting pressure.The width of the crimp is 2-4mm.

8. cooling: keep the butt pressure constant, allow the interface to cool slowly, and the cooling time will be stiff with the touch of the edge, so that the heat will not be felt.

9. docking: after cooling, Sunca Kauwa, remove the docking machine and re prepare the next interface connection.

PE polyethylene feed pipe specification

Commonly used specification 20-800 (mm)

Components & packaging

PE polyethylene feed pipe packaging is loose cargo

Ingredients and materials

PE polyethylene feed pipe is made of polyethylene

Certification

The company has successively passed IS09001 quality management system certification, IS014001 environmental management system certification, OHSAS18001 occupational health system certification, and won the quality engineering award for scientific and technological products, energy saving products and technology award, China science and technology product award, China famous brand, green environmental protection promotion products and other honorary titles.

Manufacturing process

Drying material - hot melt - tube forming - cooling - laser marking - tube cutting

exhibition

We are participated Canton Fair exhibitions more than 8 years

FAQ

Q1. Can you do customized Plastic pipe?

A: Yes, we can. Our professional design team can meet all requirement as customer needs.

Q2. What's your MOQ?

A: 10000 meters .We accept order less than MOQ. but the international shipping cost is not cheap. We suggest customers to start with 10000 meters.

Q3. What about the payment?

A: We accept L/C, T/T, D/P and Western Union payment terms.

Q4. How long will it take to execute my order?

A: Usually it is 7 working days.

Q5. Do you have products in stock?

A: Yes, We usually have 100000meters.

Q6. Can I get a sample to make sure the quality?

A: Yes, we accept the 1 set sample order before your container orders. we are provide one set sample to customer for free, but customer cover cost for sending sample.

Q7. What are the shipping ways you can offer?

A: By sea/air etc. according to customer’s requirements.

Customer reviews

Good quality, good service

Good communication and delivery. Very helpful too.

Good label. We like it

Good samples, thanks

Service

If the product cannot be used due to quality reasons within 15 days after receiving the product at the customer's place, we can provide replacement service.

Payment method

We accept L/C, T/T, D/P and Western Union payment terms.